Choosing between a 7.5‑tonne and an 18‑tonne rigid truck changes your budget, licence needs and fuel bill. We break down 2026 hire costs, legal must‑haves and pro tips for UK operators.
What the numbers mean: GVW, payload and licence
Gross vehicle weight (GVW) decides which licence you need. A 7.5‑tonne rigid falls under a Category C1 licence (up to 7.5 t). An 18‑tonne unit requires a full Category C licence. Both demand a valid Driver CPC card and a medical certificate renewed every five years.
Payload reality check
Payload is not the same as GVW. A 7.5‑tonne truck typically carries 3.5‑4 t of freight after tare weight. The 18‑tonne model can move 10‑11 t. Overloading breaches the Road Traffic Act and can invalidate insurance.
2026 hire price snapshot
Prices vary by region, season and supplier. The table below reflects average daily rates quoted on HireAnything in Q1 2026.
| Truck class | Typical daily rate (£) | Weekly rate (£) | Typical deposit |
|---|---|---|---|
| 7.5 t rigid | £120 – £180 | £600 – £950 | £500 – £800 |
| 18 t rigid | £250 – £350 | £1,200 – £1,650 | £1,000 – £1,500 |
Booking 3‑6 weeks ahead locks in the lower end of these bands and guarantees a vehicle that meets current ULEZ standards.
Running costs you can’t ignore
Fuel consumption
A 7.5‑tonne diesel returns roughly 12‑14 mpg loaded; an 18‑tonne unit drops to 8‑10 mpg. At £1.55 per litre, a 200‑mile round trip costs about £45 for the smaller truck and £70 for the larger one.
Maintenance and downtime
Rigid lorries over 7.5 t fall under the Operator Licence regime. Regular safety inspections (every 6 weeks) add £30‑£50 per check. Factor in a contingency day for unexpected repairs.
Compliance checklist for every booking
- ✅ Verify supplier holds ≥ £5 million Public Liability Insurance.
- ✅ Confirm vehicle is ULEZ‑compliant (Euro 6 or newer).
- ✅ Check driver holds correct Category C/C1 licence and current CPC.
- ✅ Ensure a written hire agreement references the Consumer Rights Act 2015.
- ✅ Request a copy of the latest HSE inspection certificate.
Pro tips for smarter haulage hire
Callout: If you only need a 7.5‑tonne truck for a single day, ask the supplier about a “half‑day” rate – many operators offer a 4‑hour window at 60 % of the daily price.
Callout: For recurring routes, negotiate a monthly retainer. Fixed‑price contracts often shave 10‑15 % off the daily rate and include priority vehicle allocation.
At HireAnything we’ve audited over 200 UK haulage providers. Every quote you receive comes with a compliance badge, so you can compare apples with apples.
Detailed UK Pricing Guide & Cost Breakdown
Understanding the full cost of hiring a rigid haulage truck means looking beyond the headline daily rate. The table below breaks down the typical components that make up the final invoice for a 7.5 t and an 18 t unit in 2026.
- Base hire rate – the daily or weekly charge quoted by the supplier (see the snapshot in the main article).
- Fuel surcharge – most operators add a variable fuel levy (typically 5‑8 % of the base rate) that tracks the weekly average UK diesel price published by the Department for Business & Trade.
- Driver provision – if you need a qualified driver, expect £180‑£250 per day for a C1 holder and £250‑£320 per day for a Category C holder, inclusive of CPC compliance.
- Insurance excess waiver – optional cover to reduce the standard £1,000‑£2,000 excess to £250‑£500; costs £15‑£30 per day.
- Vehicle preparation & cleaning – a one‑off fee of £50‑£120 for pre‑hire inspection, deep clean and ULEZ‑compliant certification.
- Deposit – refundable security deposit (see table in the main article). Most suppliers require a credit‑card pre‑authorisation; the hold is released 3‑5 working days after return, provided no damage or excess mileage is recorded.
- Mileage allowance & excess – standard contracts include 250 km/day; excess mileage is charged at £0.45‑£0.60 per km.
- Late‑return penalty – typically 1.5 × the daily rate for each hour or part‑hour beyond the agreed return time.
- Admin & booking fees – £25‑£50 per hire for paperwork, e‑signature and DVLA vehicle check.
Typical total cost for a 5‑day hire (including driver, fuel surcharge, insurance waiver and standard mileage) in Q1 2026:
- 7.5 t rigid – £1,150 – £1,450
- 18 t rigid – £2,300 – £2,950
Key price drivers:
- Region – London and the South East command a 10‑15 % premium over the North and Scotland.
- Seasonality – peak construction months (March‑June, September‑October) push rates to the top of the band.
- Vehicle specification – tail‑lift, curtain‑side, or refrigerated bodies add £30‑£70 per day.
- Length of hire – weekly and monthly discounts of 5‑12 % are standard for hires over 7 days.
- Compliance extras – ULEZ/CAZ compliance certificates, DVSA‑approved tachograph downloads and operator licence checks can add £20‑£40 per day if not included.
UK Buyer Checklist & Legal Rights
Before you sign a hire agreement, run through the checklist below and be aware of your statutory protections under the Consumer Rights Act 2015 (CRA 2015) and the Supply of Goods and Services Act 1982 (as amended).
- Verify supplier credentials – confirm the hire company holds a valid Operator’s Licence (O‑licence) for the relevant vehicle class and that their vehicles carry a current DVSA‑issued Certificate of Conformity.
- Check vehicle specification – ensure the GVW, payload, axle configuration, body type (box, curtain, tipper, fridge) and any fitted equipment (tail‑lift, winch) match your contract.
- Confirm licence & CPC compliance – the driver supplied (or you) must hold the correct Category C1 or C licence, a current Driver CPC card, and a medical certificate (D4) not older than 5 years.
- Inspect the vehicle before acceptance – complete a joint walk‑around with the supplier, photograph any existing damage, and sign a condition report. Under CRA 2015 the vehicle must be “as described”, “fit for purpose” and of “satisfactory quality”.
- Read the hire terms – look for clauses on:
- Fuel policy (full‑to‑full vs. fuel surcharge)
- Mileage limits and excess charges
- Insurance excess and optional waiver
- Breakdown cover and response times
- Early termination and cancellation fees
- Deposit handling – the deposit must be held in a client‑money account or via a credit‑card pre‑authorisation. The supplier must return it within 14 days of vehicle return, minus any documented deductions.
- Insurance documentation – request a copy of the hire company’s motor fleet policy and confirm the level of third‑party cover (minimum £1 m). If you provide your own insurance, obtain a written waiver from the hirer.
- Driver hours & tachograph – ensure the vehicle is fitted with a digital tachograph compliant with EU/UK regulations and that the supplier provides a download service or clear instructions for you to download data.
- Environmental compliance – verify the truck meets the relevant Ultra Low Emission Zone (ULEZ) or Clean Air Zone (CAZ) standards for your operating area; non‑compliant vehicles can incur daily charges of £100‑£300.
- Dispute resolution – the contract should reference an ADR scheme (e.g., the Motor Ombudsman) and state the governing law (England & Wales, Scotland or Northern Ireland). Under CRA 2015 you have a 30‑day right to reject a vehicle that does not meet the description and claim a full refund.
Questions to ask the supplier before booking:
- What is the exact GVW and certified payload for the specific unit I will receive?
- Can you provide the latest DVSA inspection report and ULEZ/CAZ compliance certificate?
- What is included in the daily rate (fuel surcharge, insurance excess, mileage, driver)?
- How is the deposit protected and when will it be released?
- What breakdown assistance do you offer and what is the average response time?
- Are there any hidden fees (admin, cleaning, late‑return, excess mileage) not shown in the quote?
- Can I see a copy of your motor fleet insurance schedule?
- What is your cancellation policy and are there any penalties for early return?
- Do you supply a driver with a valid Category C/C1 licence and current CPC card?
- How do you handle tachograph data – do you provide downloads or must I do it?
By completing this checklist and confirming the answers above, you protect yourself against unexpected costs, legal breaches and operational downtime – ensuring the hire delivers the capacity you need at a transparent, fair price.
Frequently Asked Questions
- Do I need an Operator Licence to hire a 7.5‑tonne rigid?
- Only if you operate the vehicle for hire or reward beyond a single private move. For one‑off hire the supplier’s licence covers you.
- What happens if the truck breaches ULEZ in London?
- You’ll face a £12.50 daily charge plus possible penalty fines. Always confirm Euro 6 compliance before booking.
- Can I drive an 18‑tonne truck on a C1 licence?
- No. A C1 licence caps at 7.5 t GVW. You must upgrade to Category C.
- Is the deposit refundable?
- Yes, provided the vehicle returns undamaged, clean and with a full fuel tank. Terms are set out in the hire agreement.