You’re planning a summer wedding in the Cotswolds. The forecast looks dicey. Your supplier mentions a ‘wind rating’ but can’t explain the certificate. That’s a red flag. In the UK, if a structure isn’t signed off to BS EN 13782, you’re gambling with guest safety and your deposit.
At HireAnything we’ve audited hundreds of quotes. The difference between a £75/day pop-up and a £450/day engineered frame often comes down to one document: the structural calculation pack. Let’s decode what you actually need to see before signing a hire contract.
Why BS EN 13782 Is The Only Standard That Matters
This European standard — adopted fully by the UK post-Brexit — governs temporary structures. It covers design, manufacture, and erection. It’s not optional guidance. It’s the baseline HSE inspectors use when they rock up on site.
The three wind classes you’ll see on quotes
Every marquee sold or hired in Britain must carry a class label. It’s usually riveted to the frame.
- Class 1: Rated to 80 km/h (approx 50 mph). Standard for most framed marquees on grass with ballast.
- Class 2: Rated to 100 km/h (62 mph). Heavy-duty frames, often required for exposed sites or multi-bay links.
- Class 3: Rated to 120 km/h (75 mph). Rare. Specialist alpine or coastal engineering.
If a quote just says ‘wind rated’ without a class number, walk away. You need that class printed on the marquee structural safety certificate.
Structural Calculations: The Paperwork You Must Demand
A valid certificate isn’t a one-page PDF. It’s a pack. At minimum it contains:
- Site-specific wind load calculation (BS EN 1991-1-4 + UK National Annex).
- Ballast or anchoring schedule — kg per leg, ground type assumed.
- Maximum permissible wind speed for that specific build.
- Engineer’s signature, PI insurance number, date.
Cost for this pack? Usually baked into the hire. If a supplier charges extra — £150 to £300 is typical — verify the engineer is on the ICE or IStructE register.
Ground conditions change the rating
A Class 1 frame on concrete with 1,000 kg ballast per leg holds 80 km/h. Same frame on soft clay with 200 kg water barrels? Might drop to 50 km/h. The calc pack must reflect your actual ground. Ask for a revised calc if the site changes.
Anemometer Rules: When To Evacuate
BS EN 13782 mandates continuous wind monitoring once gusts hit 40 km/h (25 mph). That means a calibrated anemometer, visible display, and a named ‘responsible person’ watching it.
Action thresholds
| Measured Gust | Required Action |
|---|---|
| 40–60 km/h | Monitor every 15 mins. Close sidewalls. |
| 60–80 km/h | Evacuate non-essential staff. Prepare full evacuation. |
| >80 km/h (Class 1 limit) | Full evacuation. Structure may fail. |
Pro tip: hire a wireless anemometer with SMS alerts. Costs £40–£60 per event. Cheaper than a claim.
Insurance & Legal Backstop
Your supplier must hold £5 million Public Liability Insurance minimum. Ask for the cert. Check the expiry date. If they only have £2M, they’re not covering a marquee collapse.
Under the Consumer Rights Act 2015, the service must be performed with reasonable care and skill. A missing wind calc = breach. You’re entitled to a full refund plus consequential losses (catering deposits, entertainment fees). Keep email trails.
Booking Timeline: Don’t Leave Calcs To The Last Week
Peak season (May–September) books fast. Structural calcs take 3–5 working days if the engineer is busy. At HireAnything we tell clients: lock in 6 weeks out. That gives time for site visits, revised calcs, and Plan B if the rating doesn’t match your exposure.
- Week -6: Confirm supplier, pay deposit, request calc pack.
- Week -4: Receive calcs. Review with venue manager.
- Week -2: Final site walk. Verify ballast delivery.
- Day -1: Build. Anemometer installed. Responsible person briefed.
Quick Checklist Before You Pay The Balance
- ☐ BS EN 13782 class label visible on frame photos.
- ☐ Site-specific structural calculation pack (PDF, signed).
- ☐ Ballast schedule matches your ground type.
- ☐ £5M PLI certificate in date.
- ☐ Anemometer included or hired separately.
- ☐ Named responsible person for wind watch.
- ☐ Evacuation plan printed and laminated on site.
Frequently Asked Questions
What happens if wind exceeds the rating during my event?
Evacuate immediately. The structure is no longer certified safe. Your supplier’s insurance covers the frame; your event cancellation cover (you did buy it?) covers lost costs. Never ride it out.
Can I use water barrels instead of concrete weights?
Only if the calc pack explicitly allows it. Water barrels shift, freeze, leak. Most engineers specify concrete kentledge or ground anchors for anything over Class 1 on grass.
Does a clearspan marquee need different calcs than a frame tent?
Yes. Clearspans act like giant wings. They need larger footings and often guy ropes. The calc pack will show higher ballast per leg. Don’t assume your frame tent supplier can just ‘scale up’.
Who pays for the anemometer — me or the hirer?
Negotiable. Many suppliers include a basic unit. Wireless alerting units are usually an extra £40–£60. Write it into the quote so there’s no day-of argument.
Right. You’ve got the knowledge. Now get the right kit. Compare verified Marquee Hire suppliers on HireAnything — every quote comes with calcs, PLI proof, and wind-class transparency. Book 3–6 weeks ahead for peak dates. Your guests deserve a roof that stays put.