You pick up a breaker, a scaffold tower, or a powered access platform. The kit looks ready, but the law still asks: who is responsible for safety once it leaves the depot? At HireAnything we’ve audited dozens of hire contracts and spoken to HSE inspectors. The short answer: you and the supplier both carry duties, and the split depends on the equipment type and the hire terms.
What PUWER Means for You
The Provision and Use of Work Equipment Regulations 1998 (PUWER) apply to every piece of kit you control on site. If you decide which tool to use, how to use it, and who operates it, you are the ‘user’ under the regs.
Key PUWER duties for hirers
- Ensure the equipment is suitable for the task and maintained in a safe condition.
- Provide adequate information, instruction and training to anyone who will operate it.
- Carry out a risk assessment before first use and review it if conditions change.
- Keep a written record of the assessment for at least three years.
Typical hire rates for a 2‑tonne excavator run £180‑£250 per day, but the PUWER cost of a competent operator and a daily pre‑use check can add £75‑£120 to the budget.
LOLER Inspections Explained
Lifting Operations and Lifting Equipment Regulations 1998 (LOLER) cover any kit that lifts loads – cranes, hoists, telehandlers, even a simple chain block. The regs demand a ‘thorough examination’ by a competent person at set intervals.
When a thorough examination certificate is required
- Before first use on a new site.
- Every 6 months for lifting accessories (slings, shackles).
- Every 12 months for lifting machines (telehandlers, tower cranes).
- After any exceptional event – overload, impact, or major repair.
Suppliers usually hold the certificate, but you must verify it covers the exact serial number you’re hiring. Ask for a copy; a reputable firm will email a PDF within minutes.
Shared Responsibilities Between Hirer and Supplier
Contract wording decides who does what. The table below shows the typical split for a standard ‘dry‑hire’ agreement.
| Task | Supplier Duty | Hirer Duty |
|---|---|---|
| Initial thorough examination (LOLER) | Yes – before dispatch | Verify certificate matches equipment |
| Daily pre‑use inspection | No | Yes – operator checks |
| Operator training & competency | Optional (often extra) | Yes – ensure trained staff |
| Maintenance & repair logs | Yes – keep full history | Record any on‑site defects |
| Public liability insurance (£5 M minimum) | Yes – policy in place | Confirm cover extends to hired kit |
If you opt for a ‘wet‑hire’ (supplier provides operator), the supplier inherits the operator‑training duty, but you still own the risk assessment for the specific site layout.
Practical Checklist for Every Hire
Print this, stick it on the site office wall, and tick each item before the kit arrives.
- Confirm the supplier’s £5 M public liability certificate is current.
- Obtain the latest thorough examination certificate (LOLER) for the exact asset.
- Complete a site‑specific risk assessment and share it with the supplier.
- Brief all operators on safe working loads, emergency stops, and exclusion zones.
- Log the pre‑use inspection on the day of delivery – photograph any damage.
- Store all certificates, risk assessments, and inspection sheets for a minimum of three years.
Keeping Records & Staying Audit‑Ready
HSE inspectors love a tidy file. A digital folder labelled ‘Hire 2026 – PUWER/LOLER’ with sub‑folders for each contract works well. Include:
- Signed hire agreement.
- Supplier’s insurance and accreditation (e.g., SafeContractor, CHAS).
- Thorough examination certificates with expiry dates highlighted.
- Daily inspection sheets signed by the operator.
- Correspondence about any defects or near‑misses.
Booking 3‑6 weeks ahead through HireAnything guarantees the supplier can allocate a freshly examined unit and supply the paperwork before you need it.
Detailed UK Pricing Guide & Cost Breakdown
Tool hire rates in the UK vary by region, hire duration, and equipment class. Below are indicative 2026 daily rates (ex‑VAT) for common plant, plus the hidden costs that often catch hirers out.
Typical Daily Hire Rates (2026)
- 1.5‑tonne mini excavator: £110 – £150
- 3‑tonne tracked excavator: £170 – £230
- Telehandler 4 m lift: £130 – £180
- Scissor lift 8 m: £95 – £130
- Breaker (hydraulic, 30 kg): £45 – £70
- Plate compactor: £35 – £55
- Generator 10 kVA: £40 – £65
- Scaffold tower (double width, 4 m): £55 – £85
Weekly & Monthly Discounts
- Weekly rate: typically 4.5 × daily rate (e.g., £110/day → £495/week).
- Monthly rate: typically 18 × daily rate (e.g., £110/day → £1,980/month).
- Negotiate “standing hire” for long‑term projects – depots often drop to 15 × daily rate for 3‑month+ contracts.
Mandatory Extras & Surcharges
- Delivery/collection: £60 – £120 each way within 25 mi; £2.50/mi thereafter.
- Fuel surcharge: 5‑8 % of hire value if diesel > £1.60/litre (most depots index quarterly).
- Damage waiver (CDW): 10‑15 % of hire cost; reduces excess from £1,000‑£2,500 to £150‑£250.
- Operator hire: £220 – £300/day (CPCS carded) including travel & subsistence.
- Weekend/out‑of‑hours surcharge: 50 % uplift on daily rate for Sat/Sun/Bank Holiday use.
Deposit Rules & Payment Terms
- Standard deposit: £250 – £1,000 per machine (refundable on safe return).
- Credit account: 30‑day terms after credit check; new accounts often require first hire prepaid.
- Card pre‑auth: Depots place a hold for deposit + estimated hire value; released 3‑5 working days post‑return.
- Late return: Charged at daily rate + 20 % per day until collected.
Budgeting Template (Example: 2‑week mini‑excavator hire)
- Hire (10 days @ £130): £1,300
- Delivery/collection: £180
- Fuel surcharge (6 %): £78
- Damage waiver (12 %): £156
- Operator (5 days @ £250): £1,250
- Total estimate: £2,964 + VAT
UK Buyer Checklist & Legal Rights
Before signing a hire contract, run through this checklist to protect your business under the Consumer Rights Act 2015 (CRA), Supply of Goods and Services Act 1982, and PUWER/LOLER obligations.
Pre‑Hire Verification
- Supplier accreditation: Confirm CPA (Construction Plant‑hire Association) or HAE (Hire Association Europe) membership.
- Equipment certification: Request current Thorough Examination certificate (LOLER) for all lifting kit – must be <12 months old (6 months for accessories).
- PUWER compliance pack: Ask for manufacturer’s manual, last service record, and EC Declaration of Conformity.
- Insurance certificates: Supplier must hold £5 m+ Public Liability and £10 m Employers’ Liability; ask for copies.
- Operator competence: If supplying an operator, verify CPCS/NPORS card, medical, and recent refresher training.
Contract Must‑Haves (CRA 2015 & Supply of Goods and Services Act)
- Clear description: Make, model, serial number, year of manufacture, and specification.
- Fitness for purpose: Clause stating equipment is suitable for the specific task you described.
- Satisfactory quality: Equipment must be free from defects, safe, and durable for the hire period.
- Delivery & collection dates/times: Exact windows; penalties for late delivery/collection.
- Breakdown response: Maximum 4‑hour response (on‑site) or 24‑hour swap guarantee.
- Liability caps: Supplier liability should not be capped below £2 m for property damage/personal injury.
- Termination rights: Your right to terminate with 24 h notice if equipment fails PUWER/LOLER checks on site.
On‑Site Acceptance Procedure
- Conduct a joint pre‑use inspection with depot driver; photograph any damage.
- Sign a “Condition Report” (not just delivery note) – keep a copy for 3 years.
- Verify safety devices function: dead‑man handles, load moment indicators, guardrails, emergency stops.
- Confirm fuel type & level; record hour‑meter reading.
Questions to Ask the Supplier
- “Can you email the current Thorough Examination certificate before delivery?”
- “What is your 24‑hour breakdown swap policy – do you guarantee a like‑for‑like replacement?”
- “Is the damage waiver mandatory, or can I use my own plant insurance?”
- “Do you provide a RAMS (Risk Assessment Method Statement) template for this machine?”
- “What are the exact excess amounts with and without the damage waiver?”
- “Can you confirm the operator’s CPCS card is in date for the specific category?”
Your Statutory Remedies (CRA 2015)
- Short‑term right to reject: Within 30 days, you can reject faulty equipment for a full refund.
- Repair or replacement: After 30 days, supplier must repair or replace within a reasonable time.
- Price reduction/final right to reject: If repair fails, you can claim a price reduction (up to 100 %) or terminate the contract.
- Compensation for consequential loss: Recoverable if reasonably foreseeable (e.g., project delay costs).
Record‑Keeping Essentials
- Hire contract, condition reports, Thorough Examination certificates – retain 3 years minimum.
- Daily pre‑use check sheets (PUWER) – keep on site for HSE inspection.
- Correspondence on breakdowns, swaps, and damage claims – email trail preferred.
Frequently Asked Questions
Do I need a separate LOLER certificate if the supplier already has one?
Yes. You must verify the certificate matches the exact serial number you’re hiring and that it is in date. Keep a copy on site.
What happens if the equipment fails a daily pre‑use check?
Stop work immediately, tag the kit out of service, and notify the supplier. They are responsible for repair or replacement under the hire terms.
Can I rely on the supplier’s risk assessment?
Only as a starting point. You must produce a site‑specific assessment that reflects ground conditions, access routes, and any concurrent works.
How much should I budget for compliance on a typical week‑long hire?
Allow £150‑£300 for operator training refreshers, £50‑£80 for printing and storing records, and £100‑£200 for any additional thorough examinations if the hire spans a certificate expiry.
Ready to hire compliant kit without the paperwork headache? Search verified Tool Hire suppliers on HireAnything and book today – your site, your safety, your peace of mind.