Booking a spare room for a party, workshop or pop‑up shop feels simple until the paperwork lands on your desk. At HireAnything we’ve audited dozens of UK venues and the same gaps appear time after time. Below is a practical, no‑fluff checklist you can hand to any supplier before you sign.
1. Legal Foundations You Can’t Ignore
Key statutes & standards
- Regulatory Reform (Fire Safety) Order 2005 – places the duty on the “responsible person” (usually the hirer) to carry out a fire risk assessment.
- Health & Safety at Work Act 1974 – requires a written risk assessment for any activity that could affect guests or staff.
- Equality Act 2010 – mandates reasonable adjustments so disabled visitors can access the space.
- Consumer Rights Act 2015 – protects you if the venue fails to meet the description or safety promises.
- Public Liability Insurance – minimum £5 million cover is standard for reputable providers.
Ask the venue for a copy of their current fire risk assessment and public liability certificate. If they can’t produce them within 24 hours, walk away.
2. Fire Risk Assessment & Emergency Exits
What a compliant assessment looks like
A proper fire risk assessment isn’t a one‑page tick list. It must identify ignition sources, fuel loads, people at risk, and the measures that reduce each hazard to “as low as reasonably practicable”.
Quick fire‑safety checklist (copy‑paste into your phone)
- ✔️ Written fire risk assessment dated within the last 12 months.
- ✔️ At least two independent escape routes from every occupied area.
- ✔️ Exit doors open outward, are unobstructed, and fitted with panic hardware.
- ✔️ Emergency lighting tested monthly (record log).
- ✔️ Fire extinguishers appropriate to the risk (CO₂ for electrical, water for paper).
- ✔️ Clear signage illuminated to BS 5266‑1.
- ✔️ Assembly point marked and communicated to all guests.
Exit width vs. capacity – a quick reference table
| Maximum Occupancy | Minimum Total Exit Width (mm) | Typical Door Count |
|---|---|---|
| Up to 60 | 750 | 1 x 750 mm |
| 61–120 | 1 050 | 2 x 525 mm |
| 121–200 | 1 500 | 2 x 750 mm |
| 201–300 | 2 100 | 3 x 700 mm |
If the venue’s doors don’t meet the width for your expected headcount, you’ll need a larger space or a reduced guest list.
3. Maximum Capacity Calculations & Crowd Management
How to work out the legal limit
The Regulatory Reform (Fire Safety) Order uses a simple floor‑area method for “assembly” uses: 0.5 m² per person for standing events, 1 m² per person for seated. Add 0.5 m² per wheelchair user. Always round down.
Capacity checklist
- ✔️ Measure usable floor area (exclude fixed furniture, stage, bar).
- ✔️ Apply the correct density factor (standing vs seated).
- ✔️ Subtract any areas blocked by equipment hire (e.g. PA stacks, staging).
- ✔️ Verify the venue’s own licence capacity – it may be lower than the fire calc.
- ✔️ Produce a simple crowd‑flow diagram showing entry, exit and queuing zones.
Remember: the lower of the fire‑calc figure and the licence figure is your hard ceiling. Exceed it and you’re personally liable.
4. Accessibility & Equality Act Compliance
Reasonable adjustments you should expect
“Reasonable” is judged on cost, practicality and the size of the organiser. For a spare room hire costing £150–£250 per day, the following are usually deemed reasonable:
- Level access or a compliant ramp (gradient ≤ 1:12).
- Accessible toilet within 40 m of the room.
- Clear signage with tactile lettering and high‑contrast colours.
- Hearing‑loop or portable induction loop for PA systems.
- Space for a wheelchair turning circle (1.5 m diameter).
Ask the provider for an Access Statement. If they don’t have one, request a written confirmation of the adjustments they can deliver before you book.
5. Equipment Safety – PAT Testing & Hired Gear
Your responsibilities when you bring in kit
Any electrical equipment you hire (lighting rigs, sound desks, catering appliances) must have a current PAT certificate. The venue’s own fixed wiring should be inspected to BS 7671 every five years.
- ✔️ Request PAT certificates for every item you’ll plug in.
- ✔️ Keep a copy on site for the duration of the event.
- ✔️ Ensure all cables are rated for the load and routed away from walkways.
- ✔️ Confirm the venue’s RCD protection covers the circuits you’ll use.
If a supplier can’t show a PAT label dated within the last 12 months, treat the kit as non‑compliant and source an alternative.
Frequently Asked Questions
Do I need a fire risk assessment for a one‑off private party?
Yes. The “responsible person” is whoever controls the premises for the event. Even a single evening hire triggers the duty under the Fire Safety Order.
What happens if the venue’s licence capacity is lower than my fire‑calc number?
You must adhere to the lower figure. Over‑capacity invalidates insurance and can lead to prosecution.
Can I rely on the venue’s existing accessibility features?
Only if they meet the Equality Act’s “reasonable adjustment” test for your specific event. Always get written confirmation.
How far in advance should I book to guarantee a compliant venue?
Three to six weeks ahead gives you time to review certificates, negotiate adjustments and lock in a supplier who meets PIPA/HSE standards.
Ready to book a safe, compliant spare room? Browse verified providers on HireAnything, compare quotes in £ GBP, and secure a venue that ticks every box on this checklist. Your event deserves peace of mind – start your search today.