You’ve booked the venue. The date is locked. Now the real work begins. A technical rider isn’t just paperwork. It’s the document that stops your show from going dark halfway through the first act.
At HireAnything we’ve audited hundreds of Venue Hire suppliers across the UK. We’ve seen promoters turn up with a 60-amp trussing rig and find only a domestic 13-amp socket. We’ve watched lighting designers discover rigging points rated for half the weight they need. Don’t let that be you.
Why Your Technical Rider Matters
Think of your rider as a contract between your production and the building. It sets expectations before a single cable is run. Get it vague, and you pay for last-minute fixes. Get it precise, and everyone knows exactly what’s being delivered. As the event organiser, you should analyse the load schedule and production programme well before load-in.
The Cost of Getting It Wrong
A missed power spec can mean hiring a generator on the day. That’s easily £250 to £600 extra, plus fuel and a noisy engine ruining your audio mix. A rigging miscalculation can ground your entire lighting truss. At best, you reschedule. At worst, the venue shuts you down.
What UK Law Expects
UK venues must carry at least £5 million in Public Liability Insurance for public events. Your supplier should prove it. The Consumer Rights Act 2015 means the service must be carried out with reasonable care and skill. If the venue specs are wrong and they didn’t warn you, you may have grounds to claim. HSE guidelines also apply to anything suspended above an audience. No exceptions.
Power & Electrical Specs
Never assume a venue has the power you need. Ask for the distribution board location, phase availability, and socket ratings in writing.
Three Phase Power Venue Requirements
Most professional shows need three phase power. A standard UK domestic socket gives you 13 amps at 230 volts. That’s roughly 3 kilowatts. A moving light rig, PA system and video wall can swallow that in minutes. Ask if the venue offers 32-amp, 63-amp or 125-amp three phase feeds. If they don’t, budget for a generator.
Socket Types & Load Calculations
List every piece of kit that plugs in. Add 20 percent headroom. Then ask the venue: how many circuits? Are they RCD protected? Where are the earth points? Get a site plan showing socket locations. Mark them on your stage plot.
Pro Tip: Bring a clamp meter to your site visit. Verify the supply yourself. Don’t take a venue manager’s word for it.
Rigging Points & Structural Safety
Hanging anything above people requires serious paperwork. The venue must provide load ratings for every rigging point.
Trussing Weight Limits
Trussing weight limits vary by building. An old warehouse might take 500 kilograms per point. A modern purpose-built venue could handle 2,000 kilograms. Never exceed the lowest rated point in your design. If your rig weighs more, spread it across more points or hire additional steelwork.
Hanging Points & Risk Assessments
Ask for the venue’s structural engineer sign-off. Request a copy of their rigging risk assessment. Your own production team needs a method statement too. At HireAnything, we only list Venue Hire providers who can show PIPA or HSE-compliant rigging documentation.
Callout box: If you’re flying speakers or lights, confirm whether the venue allows motorised hoists. Some older buildings ban them outright.
AV Venue Hire Specs
Audio, video and lighting need their own section. Patch points, cable runs and control positions should all be mapped before load-in.
DMX Lighting & Signal Flow
DMX lighting needs a dedicated data run. Don’t daisy-chain audio and lighting on the same multicore if you can avoid it. Ask where the lighting console position sits. Is there a clear sightline to the stage? Is there power at the desk? Where does the DMX universe terminate?
Sound, Screens & Patch Points
For sound, request a stage plot with monitor wedges, front-of-house positions and microphone patch locations. For video, confirm screen dimensions, throw distance and whether the venue has HDMI, SDI or fibre connectivity. If you’re bringing an LED wall, check floor loading. Those panels are heavy.
Venue Site Visit Checklist
Book your site visit three to six weeks ahead. Peak seasonal availability disappears fast. Take this list with you:
- Photograph every socket and distribution board.
- Measure ceiling height and rigging point spacing.
- Confirm three phase power venue supply and amperage.
- Request trussing weight limits in writing.
- Test DMX lighting and audio patch points.
- Check floor loading for AV equipment and trussing.
- Verify Public Liability Insurance certificate (minimum £5M).
- Ask about load-in access, parking and curfew times.
| Item | Typical UK Hire Cost | Notes |
|---|---|---|
| Basic venue technical spec review | £75 - £250/day | Includes power and AV walkthrough depending on service scale |
| Rigging point assessment & certification | £150 - £400/day | Structural sign-off required |
| Three phase power supply hire | £200 - £500/day | Generator if venue supply is insufficient |
| AV technician on site | £180 - £320/day | Recommended for complex shows |
Frequently Asked Questions
What should a technical rider include?
A technical rider should list power requirements, rigging points, AV specifications, stage dimensions, load-in times, crew access and insurance requirements. Attach stage plots and input lists where possible.
Do UK venues need £5 million Public Liability Insurance?
Yes, for most public events. Always ask to see the certificate. If the venue can’t produce it, treat that as a red flag and speak to your HireAnything account manager.
Can I hang my own trussing at any venue?
No. You must use the venue’s approved rigging points and respect their trussing weight limits. Unauthorised rigging can invalidate insurance and breach HSE rules.
How far in advance should I book?
Book three to six weeks before your event. This guarantees peak seasonal availability and gives the venue time to complete PIPA/HSE safety compliance checks.
Stop guessing. Start building your rider with verified specs from the UK’s best venues. At HireAnything, we connect you directly with Venue Hire providers who supply transparent quotes, full technical documentation and the insurance paperwork you need. Search your date, compare specs, and book with confidence.
CTA: Find your perfect venue today. Browse verified Venue Hire suppliers on HireAnything and lock in your technical specs before the season fills up.